Masterson’s Extreme Cutting Compound is designed to quickly eliminate heavy paint defects on all vehicles. The heavy-duty compound is engineered to work with all dual-action, rotary, and hybrid polishing machines. Advanced micro-cutting abrasives quickly remove 1500-2000 grit sanding scratches and swirl marks. Masterson’s Extreme Cutting Compound is safe for all conventional clear coat, single stage paintwork, and ceramic clear coat finishes. Water-based formula is body shop safe for maximum versatility. Quickly removes oxidation, fading, and scratches to bring paintwork back to life. Works on cars, trucks, motorcycles, RVs, aircrafts, and marine watercrafts. Masterson’s Extreme Cutting Compound permanently removes defects and imperfections to achieve flawless results. Remove the toughest paint defects with Masterson’s Extreme Cutting Compound.DIRECTIONS: Shake Well – Work on cool surface for best results – Work a 2’x2’ section at a time DA APPLICATION: Apply 4-5 drops to a desired pad – Prime pad with Masterson’s Pad Conditioner Spray – Spread compound on speed setting 1 – Set DA machine to speed setting 5-6. – Work area using moderate pressure in 2-3 passes until polish becomes clear – Follow with light pressure on machine to achieve best results – Remove compound residue using a clean microfiber towel – Follow with Masterson’s Swirl Remover Polish for a perfect finish. ROTARY APPLICATION: Apply 4-5 drops to a desired pad - Prime pad with Masterson’s Pad Conditioner Spray - Set machine speed to 1000-1500 RPM to spread compound on surface – Applying zero pressure, using only the weight of the machine, work surface area in 3-4 passes until compound become clear – For final pass adjust machine speed to between 1200-1800 RPM. Work area until perfect results are achieved – Remove compound residue using a clean microfiber towel - Follow with Masterson’s Swirl Remover Polish for a perfect finish.